Construction & Landscaping Calculators
Construction, landscaping, and home-improvement calculators with sourced data and transparent methodology. More launching as research clears the bar.
Gravel calculator
Convert length, width, and depth into cubic yards, tons, bags, and cost. Loose stone is about 1.4 tons per cubic yard; compacted base is 1.85.
Concrete calculator
A 10-by-10-foot slab 4 inches thick holds 1.23 cubic yards; order 1.36 with 10% extra, or 62 eighty-pound bags.
Concrete slab cost calculator
Installed slab cost from the Census cost-structure model; a 4-inch slab on a base runs about $6.42 per square foot.
Concrete bag calculator
Counts concrete bags for slabs, footings, and post holes at every size; a 10-by-10 slab needs 62 eighty-pound bags.
Concrete weight calculator
A cubic yard of plain concrete weighs about 3,915 lb, roughly 2 US tons, at a density of 145 lb per cubic foot.
Driveway area calculator
Driveway area in square feet and square meters for rectangle, round, or L-shape; a two-car area covers about 360 to 400 sq ft.
Driveway cost calculator
Installed concrete driveway cost from the Census cost-structure model, about $6.42 per square foot for a plain 4-inch drive.
Sand calculator
Calculates cubic yards, tons, bags, and cost of sand; sand weighs about 2,700 lb per cubic yard.
Topsoil calculator
Converts area, depth, and topsoil type into cubic yards and tons, with a 25% settling allowance built in.
Cubic yard calculator
Area and depth to cubic yards, plus weight by material; an 18-by-12-foot bed 3 inches deep is 2.00 cubic yards.
Cubic yards to tons calculator
Convert volume to weight both ways; one cubic yard of loose dry gravel weighs 2,700 to 3,000 pounds.
Mulch calculator
Mulch in bags and yards for your beds; an 18-by-12-foot bed 3 inches deep needs 27 two-cubic-foot bags.
Asphalt calculator
Tons of hot-mix asphalt from area and thickness at the DOT estimating density; a 50-by-12-foot driveway at 2 inches is about 7.25 tons.
Concrete block calculator
Blocks for a wall at 1.125 per square foot, plus mortar and grout; a 40-by-8-foot wall takes about 378 blocks with waste.
Brick calculator
Bricks from the makers’ coursing formula, 6.86 per square foot for modular; a 10-by-8-foot wall takes about 576 bricks with waste.
Roof pitch calculator
Pitch, degrees, slope and ridge height from a rise and run, an angle or a building’s width; a 6/12 roof is 26.6 degrees and a 50% slope.
Roof square footage calculator
Roof area and roofing squares from the footprint, overhang and pitch; a 40-by-30-foot house with 1-foot overhangs and a 6/12 roof has about 1,503 square feet of roof.
Shingle calculator
Bundles of shingles at each line’s rated coverage, plus starter strip and ridge cap; that 40-by-30-foot house at 6/12 takes 51 bundles of GAF Timberline HDZ with 10% waste.
Metal roofing calculator
Metal panels and their cut length from the roof’s size, pitch and panel coverage, plus screws and trim; that house takes 28 panels of 36-inch coverage, each 18 ft 1 in long.
Spray foam calculator
Board feet of open-cell or closed-cell spray foam from the area and a thickness or target R-value, with sets and kits; a 40-by-8-foot wall with 3 inches of closed-cell foam takes 960 board feet.
Self-leveling concrete calculator
Bags of self-leveling underlayment from the floor area and average depth, with mixing water and drying times by brand; a 15-by-12-foot floor at an average 1/4 inch takes 8 bags of LevelQuik RS.
Deck stair calculator
Risers, treads, run and stringer length from the deck height, kept within the 2021 IRC’s 7¾-inch riser and 10-inch tread; a 36-inch rise takes 5 risers of 7 3/16 inches and 4 treads.
Rubber mulch calculator
Bags or cubic yards of rubber mulch for a playground or a bed, with the CPSC’s 2025 depths and the 6-foot use zone; a 12-by-10-foot play set with its use zone takes 440 bags of 0.8 cubic feet at 8 inches.
Pine straw calculator
Bales of pine straw for your beds from the area and depth, by what a bale’s label says it covers or by its weight; a 20-by-10-foot bed at 3 inches takes 5 bales labeled 40 sq ft at 3 inches.
Asphalt millings calculator
Tons of crushed, recycled asphalt from the area and compacted depth at the FHWA’s 100 to 125 lb per cubic foot; a 50-by-12-foot driveway at 4 inches takes 10.0 to 12.5 tons.
Paver calculator
Pavers by size plus the compacted base and bedding sand; a 20-by-20-foot patio in 4x8 pavers takes about 1,800 pieces.